86-21-39540039-820
Third Floor, No. 1268, Xindian Road, Jiading District, Shanghai, China (Mainland)
4 Channels DMX LED Controller DMX512 Decoder 12V LED Driver RGBW
Details of 4 Channels DMX LED Controller:
This 4CH DMX Decoder features a LCD Screen Display that is much easier to work with than traditional dip-switches, as well as a secure screw-down terminal for strong connections.
1,Converts standard DMX signals to PWM output for driving 12V or 24VDC LED lighting.
2,5A/Channel,Max 20A,240W/480W,Works with 12V and 24VDC Lights .
3,5000Hz or Higher PWM Frequency to avoid flicker when filming in Cameras.
4,Can drive up to five-wire RGBW LED lighting,achieving asynchronous color changes effect under working with dmx master controller ,dmx console or dmx swtich control .
5,Setting the DMX address freely by LCD screen display.
6,With the light selected mechanism that can be dimming every channel with Red-Green-Blue-White colors.
7,256-levels brightness,full-color with driver controls.
8,Can be matched with different LED module neatly.
9,Customized/3 Years Warranty.
| RGBW DMX512 Decoder Series | ||||
| Model NO. | Control Type | Max Current Load | Max Output Power | DMX512/PWM Socket |
| DE8356 | LCD Display | 4CH*10A | 480W(12V)/960W(24V) | RJ45/XLR /Screw Terminal |
| DE8358 | DIP Switch | 4CH*10A | 480W(12V)/960W(24V) | RJ45/XLR/Green Terminal |
| DE8015 | DIP Switch | 4CH*5A | 240W(12V)/480W(24V) | Screw Terminal |
| DE8032 | LCD Display | 4CH*3A | 144W(12V)/288W(24V) | Press Button Terminal |
| DE8035 | LCD Display | 4CH*5A | 240W(12V)/480W(24V) | Screw Terminal |
| DE8036 | DIP Switch | 4CH*5A | 240W(12V)/480W(24V) | RJ45/Press Button Terminal |
| DE8235 | LCD Display | 4CH*5A | 240W(12V)/480W(24V) | Press Button Terminal |
| DE8236 | LCD Display | 4CH*5A | 240W(12V)/480W(24V) | RJ45/Pluggable Terminal |
| DE8238 | Digital Display | 5CH*4A | 240W(12V)/480W(24V) | RJ45/Screw Terminal |
| DE8239 | DIP Switch | 6CH*6A | 480W(12V)/960W(24V) | RJ45/Screw Terminal |
| DE8051 | DIP Switch | 350MA/64W | 64W | RJ45/Press Button Terminal |
| DE8052 | DIP Switch | 700MA/128W | 128W | RJ45/Press Button Terminal |
Images of 4 Channels DMX LED Controller:
Instructions of 4 Channels DMX LED Controller:
1, Press the key
, shows up the DMX512 external control and internal dimming program menu.Adjusting the dmx address code(0~512) and the brightness(1~4 Channel) by up and down keys 
.
2,Input and output dmx terminal, please press the panel identifies the correct wiring.
3,7PIN power input and output drive interface, please press the panel identifies to wiring on.
The power supply for the 12V to 24V input (for decoder and decoder with lamp power supply). Common anode output drive, with one LED+ interface, 4 channel R-,G-, B-, W- output interface).
Notice: With self-testing procedures, dmx address setting to "000", RGBW full output during 3s,then R,G,B,W. color gradient.
1,DMX signal cable with three core belt shielding line (signal special wire), DMX signal positive,
negative terminal crimping, in DMX signal line plug should be paid special attention to the polarity. The input interface and corresponding signal output from the DMX512 controller,signal is negative, and the connection of DE8035 signal.
2,The DMX5000 output and DE8035 transmission line can't exceed 300 meters.
3,Most DMX5000 each port connected 170 DE8035, the JBLED FLASH light system software can realize control and computer on-line, realize unlimited expansion cascade with DMX lamp.
4,Every connected 32 DE8035 control, DMX signal must be combined with a signal amplifier (such as: RE2000),cascade cannot be more than 4PCS.
Thank you very much for viewing this page, and wish you a nice day!
Please click the button below to view our homepage.
